Ocean Measuring Instruments

Product Details:

Features:

• With interchangeable anvils assisting wider range usage with one micrometer. (upto 1000MM, above 1000MM micrometers are with collars).
• Pipe type light weight but rigid blue metallic colored finished frame to assist easy handling despite the large size of micrometer.
• Carbide tipped measuring faces.
• Clear graduations on satin-chrome finished thimble.
• Positive locking clamp.
• Ratchet stop for exact repetitive readings.

 

Product Details:

Features:

• Made from tempered steel.
• Size clearly stamped on each leaf.

 

Product Details:

Mfg. from graded cast iron and ground. Worm is hardened & Ground The worktable is graduated to a full 360°. For tables having a ratio of 90: 1 one turn of the handle moves the table 4°. The micro collar is graduated in steps of 1 min. Vernier scale makes setting down to 10 Second Possible. We also offer indexing sets & tail stocks.

Product Details:

Features:

• Ocean’s magnetic stands accept all dial indicators and dial test indicators.
• The ON / OFF lever offers instant mounting and dismounting.

 

Product Details:

Additional Information:

• Item Code: RDC

Product Details:

Features:

• Spring loaded plungers expand within the bore, hole or groove determining the internal dia or groove width with use of a micrometer. Packing: Vinyl pouch with outer hardboard case.

 

Product Details:

Features:

• These gauges can be used for inspection, layout, pattern making and other machining jobs.
• Ideal for quick checking of convex and concave radii of all types possible with each gauge having five gauging surfaces.
• Satin-chrome finished.

Product Details:

Features:

• Special hardened steel.
• As per DIN 861 / JIS B7506 standards.
• Excellent wring ability.
• Individual slips marked with identification number.
• Each set provided with manufacturer’s test certificate.

Specifications:

Product Details:

Features:

• Useful for easy and accurate measurement of narrow or recessed areas that dial indicators cannot access.
• No-clutch type for automatic reversal of measurement direction.
• Glare free dial face.
• With jeweled bearings felicitating high sensitivity.

Specifications:

Product Details:

Features:

• For checking the hardness of rubber, soft plastics and similar materials.

 

 

Product Details:

This set consists of 30 comparison specimens covering six commonly used machining methods (6 horizontally milled, 6 turned, 6 plain-ground, 3 lapped, 3 external ground ). A label gives the Ra values off each specimen in both metric and imperial units. The measurement of surface roughness is not as straightforward as most other engineering measurements, such as length or angle or hardness and in order to get good accuracy, expensive instruments are needed. These are often unsuitable for workshop use where roughness of machined surfaces can usually be assessed conveniently and with sufficient reliability using visual and tactile (fingernail) comparison with a standard set of surfaces machined in the same way. These problems are solved by our surface roughness specimens set which is simple to use, inexpensive and hence widely used in many different applications. Fitted pouch with attached specimens.

Product Details:

PI Tapes / Circometers (Precision Diameter Tapes)

Features:

• Ocean manufactures outside and inside diameter tapes which provide quick, accurate and easy measurements of both round and out of round diameters.
• Easy to use, the tape is wrapped around the outside of any cylindrical component and the vernier reading gives the diameter. 

Specifications:

(Also Available in 0.1mm reading, Range from 20 mm upto 3600 mm)

Product Details:

Features:

• Manufactured from high quality hardened steel.
• Finished & ground on both sides and edges. 

Sizes:

• 300 X 50 X8mm
• 450 X 50 X8mm
• 600 X 50 X 8mm
• 1000 X 50 X10mm
• 1200 X 55 X10mm
• 1500 X 65 X 12mm
• 2000 X 65 X 12mm
• 2500 X 65 X 14mm
• 3000 X 85 X 18mm
• 4000 X 100 X 20mm
• 5000 X 100 X 20mm
• 6000 X 120 X 20mm

Product Details:

Features:

• For the inspection and alignment of flat & cylindrical surfaces in horizontal and vertical positions (vertical position possible only with Frame levels).
• High precision longitudinal and transverse vials make it possible to accurately check or level surfaces.

Specifications:

Other reading levels available against order

Product Details:

Features:

• Shock proof via sleeve which floats over the spindle.
• Constant measuring force.
• Adjustable tolerance markers.

 

Specifications:

Product Details:

Features:

• Accurate Digital Indicator having 0.0001” least count.
• With ON / OFF / INCH / MM / ZERO switches.
• Zero setting at any position.